← Back to VOLUME 3, ISSUE 4, APRIL 2014
This work is licensed under a Creative Commons Attribution 4.0 International License.
DWDM Transmission using Hybrid Optical Amplifiers
GARIMA ARORA, SANJEEV DEWRA M. Tech Scholar, Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India Assistant professor & Head of ECE Department, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India
Downloads: Download PDF
👁 34 views📥 0 downloads
Abstract: In this paper the transmission performance of 32 × 10 Gbps with 0.8 nm channel spacing dense wavelength division multiplexed system using hybrid optical amplifiers (RAMAN-EDFA, RAMAN-SOA AND EDFA-SOA) has been investigated. The performance has been compared at different distances and has been evaluated on the basis of Quality factor, optical output power, bit error rate and average eye opening. It is observed that maximal transmission distance of 224 Km is achieved in case of RAMAN-EDFA whereas in RAMAN-SOA and EDFA-SOA hybrid amplifiers the signal can travel up to maximum distance of 218 and 211 Km with acceptable Quality Factor and Bit Error Rate respectively. The RAMAN-EDFA hybrid optical amplifier also provides the highest output power of 14.205 dBm and minimum bit error rate of 1.96e-10 at 224 Km.
Keywords: Dense Wavelength division multiplexing, EDFA-SOA, RAMAN- EDFA, RAMAN-SOA
Keywords: Dense Wavelength division multiplexing, EDFA-SOA, RAMAN- EDFA, RAMAN-SOA
How to Cite:
[1] GARIMA ARORA, SANJEEV DEWRA M. Tech Scholar, Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India Assistant professor & Head of ECE Department, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India, “DWDM Transmission using Hybrid Optical Amplifiers,” International Journal of Advanced Research in Computer and Communication Engineering (IJARCCE)
This work is licensed under a Creative Commons Attribution 4.0 International License.