← Back to VOLUME 3, ISSUE 6, JUNE 2014
This work is licensed under a Creative Commons Attribution 4.0 International License.
Modelling Of the Stabilization and Tracking Control System for Antenna
MR. N.SAI PAVAN, MR. RAMAVENKATESWARAN.N M.TECH, RV College of Engineering, Bangalore, India Assistant Professor, RV College of Engineering, Bangalore, India
Downloads: Download PDF
π 42 viewsπ₯ 1 download
Abstract: In order to speed up the data rate, the antennas are required to operate at higher radio frequencies. The increased frequency requires more precise antenna pointing system and the need of pointing control is to counter act the effect of external disturbances which includes wind gust, terrain profile etc. All these factors demand an embedded system engineer to design a more accurate antenna control system. This paper describes the control system engineering principles used in designing, testing and implementing, a control and measurement system on an antenna. The control system is modelled to monitor and control the antenna in elevation (Vertical axis) and azimuth (Horizontal axis). The system is also stabilized with the help of level sensor.
Keywords: Antenna, control system, elevation, azimuth
Keywords: Antenna, control system, elevation, azimuth
How to Cite:
[1] MR. N.SAI PAVAN, MR. RAMAVENKATESWARAN.N M.TECH, RV College of Engineering, Bangalore, India Assistant Professor, RV College of Engineering, Bangalore, India, βModelling Of the Stabilization and Tracking Control System for Antenna,β International Journal of Advanced Research in Computer and Communication Engineering (IJARCCE)
